23 Apr Are You Using The Right Load Bank Testing Solution?
You undoubtedly understand the importance of load bank testing. After all, it helps you test out real-world scenarios in a controlled environment. This, in turn, allows you to determine if the electrical and mechanical systems are performing up to scratch. Of course, over the years, most people have stuck with resistive load bank testing. This system provides equal loading capacity to both a machine and its engine. This means that at any given time, an equal amount of energy is removed from the entire operating system. While this might be a solution that you have been using for quite some time, though, you need to ask yourself – are you using the right one? This is because there is another technology that may prove to be a bit more useful to you:
What is a Reactive Load Bank?
So, the first thing to tackle is just what this type of solution is. Well, simply put, a reactive load bank mimics the systems that are impacted by electric motors and various electromagnetic devices on a power network. This type of system is often used to test capacitors, transformers, and other motor driven devices. Essentially, this type of bank will simulate either an inductive or capacitive load, depending on what is required by the system.
The Advantages of an Alternate Testing Solution
Of course, the most important question is what is the benefit of changing your testing method? Well, for all of the advantages associated with resistive load banks, it also has a few downsides as well. For instance, it can’t recreate the exact conditions that a system will experience during a power failure. A reactive bank, though, in conjunction with a resistive one will be able to do precisely that.
What’s more, this combined effect will actually be able to test individual components. This means that you will be able to determine which parts are most likely to fail during a power shutdown. So, although a resistive bank may save you time, it can also end up costing you money and efficiency later on.
A reactive bank because especially important if you are testing out new generators or backup generators. So, at the implementation of one of these systems, it is a good idea to make sure that all of your bases are covered. Of course, the true effectiveness of a reactive load bank is dependent on you getting it from a reputable manufacturer such as SEPHCO.
Choosing a Combined System
If you want to truly experience all that a load bank testing solution has to offer though, you may find that a combined option is actually better for you. It is only then that you will be able to test the system as a whole and be able to identify a specific weak point. This way, in the event of an emergency, you can be quite sure that you are well prepared.
In the end, it is all about what is best for the power system that is currently in place. Still, it is important to understand all of the options available to you. It is only then that you will be able to decide whether there is one particular product for you or if you can use a few of them to garner better results. It is only then that you will have a power system that you will be able to rely on.